Timer based Automatic Drain valve
Condensate Sensing Drain Valve
Refrigeration type Compressed Air Dryer
Desiccant- Heatless type Air Dryer
Large Desiccant Compressed Air Dryer
Sub-micron Filtrers
Vertex Dryer
Chiller
Reciprocating Air Compressor
Non-Lubricated Air Compressor
Vacuum Pump
Rotory Screw Air Compressor
Large Reciprocating Compressor
Tractor Compressor
Cooling Tower
Nitrogen Generator & Tyre Inflator
Servo Stabilizer
Isolation Transformer
Distribution Transformer
Energy Saver & Power Factor Controller

.::CLEANSWEEP MICROFILTERS ::.
 
Dirt, oil and vapour coming through Compressed Air without getting filtered could eventually have adverse effects on your end products. These contaminants have to be periodically filtered through effective means to increase the performance of pneumatic tools.
Oil and water is present both in liquid and vapour state. Complete liquid oil and water is removed by coalescing filters, which has a filter media (boro silicate micro glass fibres). Oil vapour is removed by activated carbon filters.
.:::Features:::.
>> Automatic drain valve as standard fitment
>> Particles upto 0.01 microns are also filtered at lower efficiency
>> Very low pressure drop. 1 PSI for dry media and 2-3 PSI for wet media
>> with 10-20 wt oil
>> Status indicator
>> Different coalescer grade for various applications
>> Maximum oil carry over of 0.008 ppm w/w
.::Operations::.
Two types of filters are available in this series. They are the coalescers and interceptors. Coalescing filters are made from Borosilicate glass fibre. These fine strands of glass fibre can coalesce the finest of oil and water aerosils. The fine oil or water droplet coalesces to form a large droplet which falls below because of gravity. These are typically 0.01 micron filters.
The interceptors are used for particle removal. They are used for after filter in desiccant dryer or general use for fusal instrument protectors. These filters have a very low pressure drop.


.::Application::.

Reach condensate sensing drain valves are suitable for all compressed air systems like :

>> Sensitive and CNC m/c
>> Painting systems
>> Instruments
>> Packaging

Model
Element
Grade
Drain
Type
Pipe Size
BSP/NB
Flow Rate
(scfm)
Max Working
Pressure Kg/cm ²
Dimensions (mm) Weight
KGS
A B C D
G 24 P / X / Y / A IA / EA ¼" 15 16 72 195 100 - 1
G 100 P / X / Y / A IA / EA ½" 60 16 96 237 150 - 1.5
G 250 P / X / Y / A IA / EA 1" 150 16 117 465 300 - 3.5
G 600 P / X / Y / A IA / EA 1½" 350 16 117 530 425 - 4
G 851 P / X / Y / A IA / EA 2" 500 16 170 722 480 - 10.5
G 1210 P / X / Y / A IA / EA 2" 710 16 170 722 550 - 11
G 1810 P / X / Y / A IA / EA 3" 1065 12 235 760 550 - 20
G 2200 P / X / Y / A IA / EA 4" NB 1200 12 440 1325 - 800 75
G 2600 P / X / Y / A IA / EA 4" NB 1500 12 650 1500 - 800 85
G 3400 P / X / Y / A IA / EA 6" NB 2000 12 650 1500 - 800 85

.::: Specification :::.
Description Element Grade
P
X
Y
A
Filter Element Borosilicate Borosilicate Borosilicate Activated carbon
Housing (G24 - G1810)
(G2200 - G3400)
Aluminium Pressure
Die Casting
Mild Steel
Aluminium Pressure
Die Casting
Mild Steel237
Aluminium Pressure
Die Casting
Mild Steel150
Aluminium Pressure
Die Casting
Mild Steel-
Coating - External Powder Coated
Enamal painted
(G2200 - G3400)
Powder Coated
Enamal painted
(G2200 - G3400)
Powder Coated
Enamal painted
(G2200 - G3400)
Powder Coated
Enamal painted
(G2200 - G3400)
Internal Anticorrosive
epoxy paint
Anticorrosive
epoxy paint
425Anticorrosive
epoxy paint
Anticorrosive
epoxy paint
Particle Removal 5 (Micron) 1 (Micron) 0.01 (Micron) 0.01 (Micron)
Max, Oil carryover 5 (mg / m³) 0.5 (mg / m³) 0.01 (mg / m³) 0.03 (mg / m³)
Max, Working Temp 80°C 80°C 80°C 80°C
Initial Pressure Loss 0.1 (kg / cm²) 0.1 (kg / cm²) 0.1 (kg / cm²) 0.1 (kg / cm²)
Pressure Loss for
Element Change
0.7 (kg / cm²) 0.7 (kg / cm²) 0.7 (kg / cm²) 0.7 (kg / cm²)
Element Colour Code Green Blue Red Metal

Top
All Rights Reserved to Reach Pneumatics. 2010-11