Timer based Automatic Drain valve
Condensate Sensing Drain Valve
Refrigeration type Compressed Air Dryer
Desiccant- Heatless type Air Dryer
Large Desiccant Compressed Air Dryer
Sub-micron Filtrers
Vertex Dryer
Chiller
Reciprocating Air Compressor
Non-Lubricated Air Compressor
Vacuum Pump
Rotory Screw Air Compressor
Large Reciprocating Compressor
Tractor Compressor
Cooling Tower
Nitrogen Generator & Tyre Inflator
Servo Stabilizer
Isolation Transformer
Distribution Transformer
Energy Saver & Power Factor Controller


.:: DRAIN VALVE-TIMER TYPE ::.
 
Timer based automatic drain valves are specially designed for dirty condensate. The controller is designed for dirty and harsh outdoor conditions. The valve has a large orifice and special solenoid operator section to discharge contaminated condensate. Should the valve still get clogged you can service it without removing from line. Press the knob at the bottom of the valve to mechanically clear all the sludge. Electronically flush a few times and now it is fully serviced and ready to use.
.:::Features:::.
All new Mechanical clean function
Proven Reliability
All digital Electronic Circuit for time control
Water proof IP 55 enclosures, ideal for outdoor installations
Adjustable Drain and Cycle times

The drain is controlled by a timer. The timer module periodically activates the valve. The valves are designed for dirty liquid and handle all types of condensate. These direct acting models have 2.5 mm orifice. The timer has adjustments for both Drain and cycle time. Further there is manual flush button to drain excess condensation if required.

.::Application::.

Reach Pneumatics condensate sensing drain valves are suitable for all compressed air systems like :

>> Air receivers
>> Separators
>> Air dryers
>> Filters
>> Inter and after coolers.


Specifications
CTD - 11 CTD - 11B
Voltage ............................................ 230 V AC / 50 Hz / 1 Ph ............................................
Power 8 Watts Max 15 watts Max
Protection ..................................IP 55 ............................................
Elec. Connection ............................................... DIN 43650 Micro ............................................
Inlet 1/8” BSP (F) 1/2” BSP (F)
Outlet 10 mm Hose Barb 1/2” BSP (F)
Pressure ........................................................ 16 bar (g) ........................................................
Valve Orifice 2.5 mm 4 mm
Timing ..................................... Cycle : 1 min to 60 min Adjustable .....................................
  ..............................................Drain : 1 sec to 20 Sec ..............................................
Body Brass & moving parts SS 150 litres / hour at 7 bar (g)
Compressor Capacity Upto 100 cfm Upto 500 cfm
Operating Temp ......................................................... 0 – 70°C .........................................................
Maximum discharge 100 litres / hour at 7 bar (g) of condensate 150 litres / hour at 7 bar (g)
Control ................................................ Microcontroller based ................................................
On line service ............................ Yes : Integrated Mechanical + Electronic Flush ............................
Weight 250 Grams 350 Grams
Dimensions (L x B x H) 78 x 70 x 63 78 x 70 x 100

Top
All Rights Reserved to Reach Pneumatics. 2010-11