Digital Air Gauges
Digital Air Gauge TM100 KU
Cherry introduces Digital Air Gauge for an efficient measurement based on "micro-processor based embedded technology" and non contact air sensing, integrated with Statistical Process Control software to store data in PC and to get process capability and process performance chart. Cherry’s digital air gauge is ideal for measuring dimensions with tolerance less than 1 micron. It is a non contact means of comparative dimension measurement. It uses steel plugs or ring with precision orifices. As air passes these orifices, results in pressure verses distance curve. When the orifice is restricted, the flow is reduced and pressure builds up into the system. This principle is used to monitor distance between air jet face and the part surface resulting in accurate measurement of the machined components.
Features
>> Tri color indications for accept/reject/rework
>> Optional RS232/ USB serial data output
>> Optional USB key board/barcode interface for data entry
>> Integrated Statistical Process Control software in PC
>> Real time clock
>> Operates at 3 bar
Benefits
>> Long life of tool due to non contact gauging
>> Easier data analysis
>> Improved work flow and productivity
>> Eliminates measuring error
>> Decreased down time
Cherry‘s Air Gauge TM100 comes with an Advanced SPC software to analyze the data measured. The salient features of this software includes :
>> CPK, PPK on a single window
>> X bar chart, R chart and Histogram analysis
>> Live run chart for measurements
>> Detailed process value report
>> Rejection analysis
>> Date and time based filtration
>> Filteration based on all machining parameters
Advantages :
>> Accessibility
>> User friendly
>> Saves time and eliminates the manual errors during calculation
>> Easy documentation
For More Technical Info on Digital Air Gauges
Multi Air Gauge ( TM100m KU )
>> TM 100m Comes with advanced technology to Measure different dimensions in a single air Gauge. >> It is equipped with Multiple ports with individual settings. >> The single display shows the measurement for each ports, the port can be selected using channel selected switch. >> It is comes with Auto cut off options to reduce the air loss. >> Individual SPC analysis can be done for each individual ports.
Features
>> Tri color indications for accept/reject/rework
>> Optional RS232/ USB serial data output
>> Optional USB key board/barcode interface for data entry
>> Integrated Statistical Process Control software in PC
>> Real time clock
>> Operates at 5 bar
Benefits
>> Long life of tool due to non contact gauging
>> Easier data analysis
>> Improved work flow and productivity
>> Eliminates measuring error
>> Decreased down time
Applications
>> Inside Diameter
>> Outside Diameter
>> Averaging
>> Roundness
Digital Air Gauge TM100
Cherry Precision Products introduces Digital Air Gauge for an efficient measurement based on "micro-processor based embedded technology" and non contact air sensing. Cherry’s digital air gauge is ideal for measuring dimensions with tolerance less than 1 micron. It is a non contact means of comparative dimension measurement. It uses steel plugs or ring with precision orifices. As air passes these orifices, results in pressure verses distance curve. When the orifice is restricted, the flow is reduced and pressure builds up into the system. This principle is used to monitor distance between air jet face and the part surface resulting in accurate measurement of the machined components.
Features
>> Tri color indications for accept/reject/rework
>> Operates at 3 bar
Benefits
>> Long life of tool due to non contact gauging
>> Easier data analysis
>> Improved work flow and productivity
>> Eliminates measuring error
>> Decreased down time
Applications
>> Inside Diameter
>> Outside Diameter
>> Averaging
>> Roundness